Used Scrubbers

RENDEQ, INC.

795 Driftwood Drive

Graham, NC 27253

Office Number: 336-376-9004

Fax Number: 336-376-9790

email: rendeq@bellsouth.net

Used Scrubbers

100,000 CFM Plant Air Scrubber

	AC Corporation Model RDS-100
	Two Stage Horizontal Cross-Flow 100,000 CFM Scrubber In Good Condition
	125 Horsepower Fan
	All Stainless Steel Construction Including Angle Framing
	Built In 1989 And Not In Operation Since 1994
	Two Stainless Steel 10ft High Recirculation Tanks
	Two Recirculation Pumps And Valves
	Chemical Feed System
	Disconnect Switches And Control Panel
	Inlet Plenum With Louvers
	Discharge Duct And Stack
	Scrubber Mounted On Skid
	Scrubber Support (6" H-Beam) Rusted But In Good Condition
	Plant Building Size Is 80ft x 100ft x 20ft High

~ SOLD ~

21,300 ACFM JOY MANUFACTURING 316 L STAINLESS STEEL MULTICLONE AND SCRUBBER: MULTICLONE: MODEL 9VC10, SIZE 50-5 WITH ABRASION RESISTANT TUBES AND VANES. CONSTRUCTED OF 316L STAINLESS STEEL. DESIGNED TO COLLECT AT LEAST 97% BY WEIGHT OF DUST WITH 90% BEING LARGER THAN 10 MICRON IN SIZE. OUTLET CONDITIONS OF 1.54 GR/DSCF AT 2.8" W.C. PRESSURE DROP AT 5000 #/HR INLET DUST LOADING.

Item # SCR-12-2380


AMERICAN AIR FILTER TYPE W SIZE 8 ROTOCLONE STAINLESS STEEL SCRUBBER WITH FAN…SERIAL NUMBER W910086, ARRANGEMENT “A". 7.5 HP 1760 RPM 460 VOLT. GOOD CONDITION. Item # SCR-12-1455	48" DIAMETER FIBERGLASS SCRUBBER: 48" DIAMETER X 20' TALL. 20" INLET AND 18" OUTLET. FIBERGLASS CONSTRUCTION. WITH USED PACKING. COUNTERCURRENT FLOW DESIGN PACKED COLUMN. GOOD CONDITION. Item # SCR-12-1487	HORIZONTAL CROSS FLOW SCRUBBER: HARRINGTON INDUSTRIES, ANAHEIM, CA. S/N # S-07077-1. MODEL # NL 572 MODEL ECH-66-3FBS 41" INLET AND OUTLET. TWO CIRCULATING PUMPS WITH 3 HP 3500 RPM 208/230 VOLT MOTORS. Item # SCR-12-941

Used EST two stage type 910 scrubber package. Equipped with (1) 4" EST ejector-venturi scrubber having and EST spray nozzle, type H-15, 1" teflon, with teflon spiral. (1) EST packed tower, type 955, 10", polypropylene, polypropylene packing support plate. 2.5 cu ft of 5/8" polypropylene packing, a 3/8" type F-90 spray nozzle distributor, and a polypropylene mesh mist eliminator. 200 gallon FRP separator, (2) durco pumps 1 1/2" 316 stainless steel powered by 5 HP motors, and (1) heat exchanger, size 8B60 type BEM, 2 pass, 316 stainless steel tubeside, steel shellside. Unit dimensions are 15' 6" high x 5' wide X 8' long.

Item # SCR-19-102

Contact Us For Price Quote

Here To Return To The Used Equipment Page

Home Page

New Equipment

Used Equipment

Equip. We Need

Address Info