Used Heat Exchangers

RENDEQ, INC.

795 Driftwood Drive

Graham, NC 27253

Office Number: 336-376-9004

Fax Number: 336-376-9790

email: rendeq@bellsouth.net

Used Heat Exchangers

Heat Exchangers

Item # HEA-101 & Item # HEA-102

~ BOTH ON HOLD ~


4" DIAMETER X 30" LONG STAINLESS STEEL SHELL AND TUBE HEAT EXCHANGER. ALL STAINLESS STEEL PARTS. SINGLE PASS TUBE SIDE. 90° ELBOW HAS 2.5" DIAMETER OUTLET. 90 DEGREE ELBOW HAS 2" DIAMETER INLET. TWO 1.75" DIAMETER THREADED OPENINGS. UNUSED. Item # HEA-12-1460	GLASS SHELL AND TUBE HEAT EXCHANGER: QVF (FORMERLY CORNING GLASS) PROCESS SYSTEMS, INC. 6" DIAMETER X 10’ – 6.5" LONG APPROX. MODEL B HEAT EXCHANGERS. 60 SQUARE FEET OF HEAT TRANSFER AREA. 31 TUBES WITH ¾" O.D. MAX OPERATING TEMP IS 375° F AND 20 PSIG. UNUSED. ALSO 10 SPARE TUBES ARE AVAILABLE. ~SOLD~	8" DIA METER X 24" TUBE LENGTH AMERICAN INDUSTRIAL HEAT TRANSFER SHELL AND TUBE HEAT EXCHANGER: MODEL AA-1624-9951B-1298; 300 PSI SHELL SIDE PRESSURE RATING, 150 PSI TUBE SIDE PRESSURE RATING; 300°F; 3" FPT FITTINGS SHELL SIDE; 2" FPT FITTING TUBE SIDE. SN 49788, 2146881. EXCELLENT CONDITION. Item # HEA-12-2916

Used Enerquip Inc. Approximately 45 sq ft horizontal all sanitary T-304 stainless steel u-tube bundle heat exchanger. 6-1/2 diameter x 10' long stainless steel shell. (1) welded head (1) flanged head. Shell and tube sides rated 150 psi @ 375*F. S/N 3665. National Board # 2381. Built in 1998. Shell and heads T-304L stainless steel. Tube side T-316L stainless steel. (13) tubes .625 diameter. Excellent condition!

Item # HEA-19-103

Used Doyle and Roth approximately 150 sq ft horizontal heat exchanger. All T-316 stainless steel . 14'' diameter x 8' long straight side. NB# 18224. Shell rated 75 psi @ 350*F. Tubes rated 75 psi @ 350*F. Mounted on short saddles. Single pass design. Built In 1998. (100) 3/4 diameter tubes. Fittings: (2) 2 and (2) 6 flanges.

Item # HEA-19-104

Weldon Inc. Approximately 75 sq. ft. heat exchanger. 10 3/4" diameter x 71 7/8" long. Carbon steel shell. 10 1/4" diameter C-276 Hastelloy tube sheets. (48) 1" diameter x 18 GA C276 Hastelloy tubes. Shell rated 225 PSI @ 400 degrees F. Tube sided rated 15/FV @ 350 degrees F.

Item # HEA-19-105

Unused ALFA Laval copper brazed plate exchanger. T-316 stainless steel construction. Model 300-66L. Approximately 200 Sq. feet. (66) plates 14” wide x 38 ½” high. Design pressure: maximum 25 bar, minimum 16 bar. Design temperature: maximum 225/225 degrees C, minimum –160/-160 degrees C. Flange fittings T-316L Stainless. S/N #5399512. Built 2001. Volume: 18.56/23.10 liters.

Item # HEA-19-106

Unused ALFA Laval copper brazed plate exchanger. T316 stainless steel construction. Model CB300198L. Approximately 600 sq. feet. (198) plates 14” wide x 38 ½” high. Design pressure: max 25 bar, min 16 bar. Design temperature: max 225/225 degrees C, min 160/ 160 degrees C. Volume: 58.84/69.30 liters. T 316L stainless flanges. Built 2001. S/N# 5399502.

Item # HEA-19-107

Unused ALFA Laval copper brazed plate exchanger. T316 stainless steel construction. Model 30066L. Approximately 200 Sq. feet. (66) plates 14” wide x 38 ½” high. Design pressure: maximum 25 bar, minimum 16 bar. Design temperature: maximum 225/225 degrees C, minimum –160/160 degrees C. Flange fittings T316L Stainless. S/N# 5399513. Built 2001. Volume: 18.56/23.10 liters.

Item # HEA-19-108