RENDEQ, INC.

795 Driftwood Drive
Graham, NC  27253
Office Number: 336-376-9004
Fax Number: 336-376-9790
email: rendeq@bellsouth.net

Used Filters

Industrial Filter Press     Item #FIL-101     ~ SOLD ~

Filter Plate     Item #FIL-102     ~ SOLD ~

 

SHRIVER S/S FILTER PRESS: SIZE 12 STAINLESS STEEL, APPROXIMATELY 12"x12" SQUARE PLATES, APPROX. 7 CHAMBERS. MANUAL SCREW CLOSURE. 150 PSI DESIGN. 1" THICK FRAMES TO MAKE A CAKE 1" THICK X 11" X 11". OVERALL LENGTH IS 32" LONG X 16" WIDE. NUMBER OF CHAMBERS IS 7 PER FILTER.

Item #FIL-12-1178

24" DURIRON FILTER PRESS: 16 PLATES, CGR POLYPROPYLENE; CENTER FEED; CORNER DISCHARGE. SO # E01368; AIR OVER OIL HYDRAULIC CLOSURE. BUILT BY DURIRON FILTRATION SYSTEMS DIV. CLOTHS ARE CURRENTLY IN THE PLATES.

 

Item #FIL-12-2752     ~ Sold ~

SERFILCO FILTER PRESS 18" X 18" X 2" THICK PLATES: MODEL 2-18-PPGMH; S/N P-43-0806-G; TWELVE PLATES POLY PRO UNIT HAS NO CLOSURE WITH IT. STEEL FRAME. GOOD CONDITION.

 

Item #FIL-12-2174

 

Rosenmund 0.20 Sq. Meter Filter. Constructed of T-316L stainless steel on all contact parts. S/N F75839-587-1. National Board # 18951. 20” diameter X 36” straight side. Shell rated 90 PSI @ 350oF. Jacket T-304 stainless steel rated 100 PSI @ 350oF. Shell surface area 13.65 Sq. ft. Shell volume 40.85 gallons. Equipped with hydraulic drive 5 HP power pack to raise and lower agitator assembly. Agitator output speed 5-25 RPM.

Item # FIL-19-103

 

2.8 sq ft (0.26 sq meter) glass lined De Dietrich portable nutsche filter with approximately 45 gallon capacity.  23 5/8" outer diameter x 30 5/8" deep.  Internal rated 100/FV @ -20 to 500 degrees F.  Jacket rated 90/90 @ -20 to 500 degrees F.  Filtering plate has (64) 1" holes.  Equipped with hydraulic two seep hand pump for lifting of sections and for swiveling cover after lifting.  Glass #3009.  NB# 7141.  Built in 2000.  Top fittings:  (1) 4" hand hole (with sightglass) and (2) 1 1/2".  2" center bottom drain.  MFG# 3632.

Item # FIL-19-104

 

Used 2.5 Sq meter Cogeim Filter/Dryer item # F-221 constructed of hastelloy C22 on all contact parts.  Volume 825 gallons, 3.02 cu. meter working capacity.  Electro-polished interior.  Shell rated 87/FV @ 350oF.  Half pipe coil jacket rated 116 PSI @ 350oF.  Side discharge, movable bottom with bayonet ring.  Perforated filtering bottom with center bottom discharge for batch liquors.  Includes hydraulic cylinders for lowering.  Oleo project hydraulic package and controls.  S/N 798, National Board # 77.  Mounted on carbon steel legs and bottom filtering assembly has legs with caster wheels.  Built in 1994.

Item # FIL-19-105

 

Used 3.1 sq ft (0.30 sq meter) glass lined Estrella Portable Nutsche filter with approximately 52 gallon capacity. Internal rated 50/FV @ -20 to 400 degrees F. Jacket rated 87 psi @ -20 to 400 degrees F. National Board # 16. 24" diameter x 25 1/2" deep. Fittings top: (2) 4" sightglasses and (3) 2". 2" center bottom drain. Equipped with 2 stage hand operated hydraulic jack for lifting sections. Glass # 2505. Filter in plate has (151) 3/4" holes.

Item # FIL-19-106

 

Used Sparkler Filters Inc. Model 18" basket Nutche 316 stainless steel filter. 20" diameter x 36" deep. Basket material is 316 SS electro polished. Basket capacity 24 gallon, tank capacity 48 gallon. Internal rated 60/FV @ 350 degrees F. National Board # 2315. MFR# 22540.  Basket dimensions are 17" diameter x 26" high. Fittings top (2) 1" (1) 2". Fittings bottom: (1) 3/4" (1) 2". Mounted on 304 SS legs to a portable platform with spark proof casters.

Item # FIL-19-107

 

Used Sperry 30” plate and frame filter press with approximately 134 Sq ft. filtering area, 11.2 cu ft. cake capacity. Unit consists of 9 plates, 2 head plates, and 10 frames made of 316 S/S. Also contains 1 dummy plate made of cast iron. Each of the 10 framed chambers is 2” thick. Pneumatic powered hydraulic closing unit consumes 5.5 SCFM @ 80 psig while closing, working pressure 2800 psig. Plate types (4) #47 steam HTD, (5) #49 steam HTD, (1) #47 steam HTD head plate, and (1) #49 steam HTD head plate. Design parameters: 100 psig @ 250 o F. Dimensions: 56” high x 11’ long. Built In 1990, S/N X45656A.

Item # FIL-19-108

 

Used Sperry 30” plate and frame filter press with approximately 134 Sq ft. filtering area, 11.2 cu ft. cake capacity. Unit consists of 10 plates, 2 head plates, and 11 frames made of 316 S/S. Also contains 1 dummy plate made of cast iron. Each of the 11 framed chambers is 2” thick. Pneumatic powered hydraulic closing unit consumes 5.5 SCFM @ 80 psig while closing, working pressure 2800 psig. Plate types (5) #47 steam HTD, (5) #49 steam HTD, (1) #47 steam HTD head plate, and (1) #49 steam HTD head plate. Design parameters: 100 psig @ 250 o F. Dimensions: 56” high x 11’ long. Built In 1990, S/N X45656B.

Item # FIL-19-109

 

Used ERTEL 316 stainless steel plate and frame filter. 16" x 16" square plates and frames. Unit has 12 plates (including the head and end plates), and 9 frames. Inlets and outlets are sanitary style fittings. Unit is mounted on casters. Equipped with large hand wheel for manual opening and closing. Has stainless steel drip pan.

Item # FIL-19-110     ~ Sold ~

 

Used Schenk centrifugal discharge filter type ZHF-SR 15/10 KLKB1. Pressure leaf design. T-316L stainless steel. Jacket T-304 stainless steel. 265 gallon fill capacity. Internal rated 100/FV @ -20 - 150 o C. Jacket rated 100/FV @ -20 - 150 o C. Tapered vessel KLK design. Automatic cake discharge with scraper device. 10 sq. meter filtration area. (20) filter elements, (1) separation filter element, and (2) scavenge elements. 300 liter usable cake volume. Seals are dry running, double acting mechanical type. 805mm diameter of filter element on 40 mm spacing. 12” diameter butterfly discharge.  Built In 1996. Driven by 20 HP 3/60/460 volt 1800 RPM motor. National Board #328.

Item # FIL-19-111

 

Used Schenk centrifugal discharge filter type ZHF-SR 15/10 KLKB1. Pressure leaf design. T-316L SS. Jacket T-304L SS. 265-gallon fill capacity.  Internal rated 100/FV @ -4o to 300oF. Jacket rated 100/FV @ -4o to 300oF. Tapered vessel KLK design. Automatic cake discharge with scraper device.  10 sq. meter filtration area. 21 filter elements. 300 liter usable cake volume. Seals are dry running, double acting mechanical type. 805 MM diameter of filter element on 40 MM spacing. Driven by a 20 HP 3/60/460 volt 1800 RPM motor. 12” diameter butterfly discharge. New in 1998. National Board # 353.

Item # FIL-19-112

 

Unused Diessel GMBH approx 30 sq ft rotating leaf jacketed pressure vacuum filter. Sanitary stainless steel construction. Built In 1998, not used. Horizontal tank 21 1/2 in ID x 12 in deep, electro-polished internally with clamps. ASME code stamped full VAC/87 PSI internal, 43 PSI jacket @ 300 deg F. stationary flat head with shaft mounted leaves, tank rolls back on stainless steel track to expose leaves. Has six stainless steel leaves 21 in diameter with 1 1/2 in space between the leaves. Rotation of shaft mounted leaves is via chain & sprocket drive, sew Eurodrive with 0.8 kw motor, gear reducer with handwheel for varying the speeds. Fitted with seven wash nozzles in tank for sluicing of the leaves. Can also be used for dry cake discharge. S/N 98182590. National Board #94. Spare set of unused leaves.

Item # FIL-19-113

 

Polish Filters Five 5 Units available made by  Filter Specialists, Inc (FSI) 3-bag filter - Model FSP-355-CS, Serial numbers 16296, 16297, 16298, 16299, 16300.

These filters were new in 1988. MAWP Rated at 150 psi at 500F, with stainless steel housings, made for #2 size bags,filter surface area = 13.3 sf. These were filtering edible oil at 200 gpm, 160F at 10 microns.

They can filter up to 600 gpm max flow rate if desired; each unit has a 3 inch inlet/4 inch outlet.

 Built to ASME specifications and with the "U" stamp. Filter media per customers specifications.

Dimensions are: 2 ft dia x 4 ft tall, each weight 400 pounds.

Item # FIL-17-114

Contact Us For Price Quote

Here To Return To The Used Equipment Page

Home Page New Equipment Used Equipment Equip. We Need Address Info Contact Us