|
|
 |
795
Driftwood Drive
Graham,
NC 27253 |
|
Used Electric Motor's
|
3 HP VARIABLE SPEED DRIVE. U.S. MOTORS
MECHANICAL MANUAL VARIABLE SPEED DRIVE. UNUSED.
Item # MOT-12-1194 |
400 HP, 1180 RPM, 460 VOLT , 475 AMPS, 3
PHASE, 60 HERTZ; BUILT BY U.S. MOTORS; FRAME 5807; TYPE H; CODE F; SF 1.15;
4-3/4" DIAMETER SHAFT, 15" LONG. REBUILT BY ALLEN SOUTHERN PHONE
205-478-9577 AND NOT USED SINCE REBUILT…STORED INDOORS.
~SOLD~
Item # MOT-12-1906-01 ~SOLD~ |
SEW EURODRIVE CONVEYOR MOTORS W/ VARIABLE
SPEED DRIVE. THE MOTOR IS A MODEL DF16BDT80N4-K3, 1HP, 1700 RPM, 1.13 SF, TEFC,
3PN, 230YY/360Y, 60 HZ, 3/7/1.83 AMPS. THE VARIABLE SPEED DRIVE IS A MODEL
SA57D163DT80N4-K3, 415-2074 RPM (IN) 6.5-33 RPM (OUT)1266 IN-LB TORQUE, SF 1
RATIO: 63.8, MOUNTING POSITION H1A, QTY - 10 UNITS.
Item # MOT-12-3270 |
|
New TECO Induction Electric
Motor - 600 Horse Power Type AEHA-TKUW4, K6004Volts, 2300 /
4160Amps, 132 / 72.9RPM, 1785Rating Continuous Duty Frame
6806BIns, Class FSer # MQ.D5C009-1WT, 6930 Lbs
Item # MOT-38-110 |
|
Used TECO Induction Electric
Motors - 600 Horse Power Type: AEHA-TK001TEFC 6806BINS Electric
Motor, CLASS F, Volts 2300 / 4160, Amps 132 / 73 RPM 1785 Rating
Continuous Duty, Ser. # FHD76106-3, Service factor 1.15. **Note:
300 Watt / 120 Volt Anti-Condensation Unit**
Item # MOT-38-111 |
|
Used Benshaw Softstart - Catlog
# NVRSE18-1000-4160-12, 600 Horsepower, Volts 4160, Amps 75,
Frequency 60, Serial # 5200 203826
Item # MOT-38-112 |
|
Unused but in rough condition -
SEW-EuroDrive, INC Severe Heavy Duty Motor. Type: DFT8ON4-KS,
Volts: 230/460, AMP: 3.9/1.95, HZ: 60, RPM: 1700, HP: 1, Ambient
40 degrees celsius. Slight cooling fin damage on the side. The
unit was removed from storage due to new company equipment
change over. We are not set up for testing it, but it is in good
condition. It appears to be unused.
Item # MOT-44-113 |
|
Unused but in rough condition -
Sew-EuroDrive, Inc. Severe Heavy Duty Motor. Type: DFT8ON4-KS,
Volts: 230/460, AMP: 3.9/1.95, HZ: 60, RPM: 1700, HP: 1, Ambient
40 degrees celsius. The unit was removed from storage due to new
company equipment change over. We are not set up for testing it,
but it is in good condition. It appears to be unused.
Item # MOT-44-114 |
For any questions on how to obtain service or on how to buy
equipment please email us at:
rendeq@bellsouth.net
Contact Us For Price Quote
Here To Return To The Used Equipment Page
|
|
 |
